Dell EMC OpenManage SNMP Reference Guide Version 9.1

PDF

Battery Table

This table describes available properties for each controller battery on the managed system.

The following object sets up the Battery Table.

Table 1. Battery Table. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15
Description	Defines the battery table.
Syntax	SEQUENCE OF BatteryEntry
Access	Not accessible

Table 2. Battery Entry. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1
Description	Defines the battery table entry.
Syntax	BatteryEntry
Access	Not accessible
Index	`batteryNumber`

Table 3. Battery Number. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.1
Description	Identifies the instance number of the battery entry.
Syntax	Integer
Access	Read-only

Table 4. Battery Name. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.2
Description	Identifies the battery's name as represented in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 5. Battery Vendor. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.3
Description	Identifies the battery's (re)seller's name.
Syntax	DisplayString
Access	Read-only

Table 6. Battery State. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.4
Description	Identifies the current state of battery. Possible values: 0: Unknown 1: OK 2: Failed 6: Degraded 7: Reconditioning 9: High 10: Low 12: Charging 21: Missing 36: Learning
Syntax	Integer
Access	Read-only

Table 7. Battery Roll-Up Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.5
Description	Severity of the battery state. This is the combined status of the battery and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 8. Battery Component Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.6
Description	The status of the battery itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 9. Battery Charge Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryChargeCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.7
Description	The number of charges that have been applied to the battery.
Syntax	Integer
Access	Read-only

Table 10. Battery Max Charge Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryMaxChargeCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.8
Description	The maximum number of charges that can be applied to the battery.
Syntax	Integer
Access	Read-only

Table 11. Battery Nexus ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.9
Description	Durable unique ID for this EMM.
Syntax	DisplayString
Access	Read-only

Table 12. Battery Predicted Capacity . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryPredictedCapacity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.10
Description	Displays the battery's ability to be charged. Possible values: 1: Failed - The battery cannot be charged and needs to be replaced. 2: Ready - The battery can be charged to full capacity. 4: Unknown - The battery is completing a Learn cycle. The charge capacity of the battery cannot be determined until the Learn cycle is complete.
Syntax	Integer
Access	Read-only

Table 13. Battery Next Learn Time . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryNextLearnTime`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.11
Description	Indicates the time (in hours) the next learn cycle must be executed
Syntax	Integer
Access	Read-only

Table 14. Battery Learn State . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryLearnState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.12
Description	Specifies the learn state activity of the battery. Possible values: 1: Failed 2: Active 4: Timed out 8: Requested 16: Idle 32: due
Syntax	Integer
Access	Read-only

Table 15. Battery ID. The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.13
Description	Represents unique id for battery.
Syntax	Integer
Access	Read-only

Table 16. Battery Maximum Learn Delay . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryMaxLearnDelay`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.14
Description	The maximum amount of time (in hours) that the battery learn cycle can be delayed.
Syntax	Integer
Access	Read-only

Table 17. Battery Learn Mode . The following table describes the name, object ID, description, syntax, and access level.
Name	`batteryLearnMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.15.1.15
Description	Indicates current learn mode of the battery. Possible values: 1: Auto 2: Warn 4: Autowarn 8: Unknown
Syntax	Integer
Access	Read-only